技术研发 您现在所在位置:首页 - 服务支持 - 技术研发

 

    试验方法:本企业严格按照GB/T 13542.2-2009标准执行 

 

 试验的环境条件
Test conditions
 除非另有规定,所有项目均应在温度23±2℃,相对湿度50±5%,空气净化度10000级条件下进行。Unless otherwise specified, all items shall be proceeded at a temperature 23 ± 2 ° C, relative humidity of 50 ± 5%, air purification 10000.
 取样
Sampling
 取样前至少去掉被测膜卷外三圈,后按规定数量取样。
Remove at least three outer layers from the roller of film before sampling and then proceed with sampling according to the prescribed quantity.
 外观检查
Visual inspection
 外观检查应在大于500Lx 照度的条件下进行。
Appearance inspection should be greater than 500Lx illumination conditions.
 厚度的测定
Measurement of thickness

按GB/T 13542.2中的第4条进行。As per Article 4 of GB/T 13542.2.
 

 拉伸强度和
断裂伸长率的测定
Measurement of tensile strength and elongation at break
 按GB/T 13542.2中的第11条有关规定进行,拉伸速度为(100±2.0)mm/min,夹持距为(100±2.0)mm,试样宽度:(15±1.0)mm。As per Article 11 of GB/T 13542.2 with stretching speed(100±2.0)mm/min, clamping distance(100±2.0)mm and sampling width(15±1.0)mm.
 
 热收缩率的测定
Measurement of thermal shrinkage
 按GB/T 13542.2中的第23条进行。烘箱温度120±2℃,烘焙时间10min。
As per Article 23 of GB/T 13542.2. Oven temperature 120±2℃ and baking time 10 mins.
 温润张力的测定
Measurement of gentle tension
按GB/T 13542.2中的第10条进行。As per Article 10 of GB/T 13542.2.
 
 表面粗糙度的测定
Measurement of surface roughness
按GB/T 12542.2中的第8条进行。As per Article 8 of GB/T 12542.2. 
空隙率的测定
Measurement of porosity  
按GB/T 13542.2中的第35条进行。As per Article 35 of GB/T 13542.2. 
 介电强度的测定
Measurement of dielectric strength
直流试验元件法按GB/T 13542.2中的第18.2.1条进行;50点电极法按GB/T  13542.2中的第18.2.2条进行。For Dc test method of components, as per Article 18.2.1 of GB/T 13542.2. For 50 point electrode, as per Article 18.2.2 of GB/T 13542.2.
体积电阻率的测定
Measurement of volume resistivity 
按GB/T 13542.2中的第16条进行。As per Article 16 of GB/T 13542.2.
 
 表面电阻率的测定
Measurement of the surface resistivity
按GB/T 13542.2中的第15条 进行。As per Article 16 of GB/T 13542.2 
 电气弱点的测定
Measurement of insulation failure
按GB/T 13542.2中的第19.3条或19.1条进行,受试面积不小于5㎡,测试电压为:200V/μm。As per Article 19.3 or 19.1 of GB/T 13542.2 with a test area not less than 5 ㎡ and the test voltage of 200V/μm.
 
 可圈绕性的测定Measurement of winding performance  按GB/T 13542.2中的第7.3条进行。As per Article 7.3 of GB/T 13542.2.
 
熔点的测定
Measurement of
melting point 
按GB/T 13542.2中的22条进行。As per Article 22 of GB/T 13542.2. 
 密度的测定
Measurement of density
按GB/T 13542.2中的第5条进行。As per Article 5 of GB/T 13542.2. 
 
  • 地址:江苏省如皋市经济开发区茶庵路69号  电话:0513-87309888  0513-87309898  传真:0513-87309899  
  • Copyright © 2012 南通百正电子新材料有限公司 All rights reserved    企智网络提供技术支持